What Happens when a Gasoline Car's Fuel Tank Gets Filled with Diesel? | Roberts Automotive and Industrial Parts Manufacturing Corporation

So you’ve accidentally put diesel in your gasoline-fuelled car. How do you remedy this? Well, actually, it’s highly unlikely that you one day end up in this circumstance for cars now have specifically-designed gas tanks that will only fit the nozzle of the fuel it requires; unleaded gasoline nozzles are different from that of diesel.

But let’s just say, hypothetically, that, somehow, someway, an unhealthy amount of diesel found its way inside your gasoline car. Say that you ran out of fuel on the road and instead of getting regular gasoline, you got a metal canister and they pumped diesel instead. Bummer, but you’ve no idea about the mistake, so you pour the contents of that canister with hope and optimism.

via roberts.com.ph

The 2013 Manila International Auto Show | Automotive Parts Suppliers

Earlier this April, the 4^th to 7^th specifically, was yet another heart-attack inducing, breath-taking killer of a show – the Manila International Auto Show (MIAS). With over 300 cars on display and thousands of car lovers in attendance, 2013 has stepped it up a notch higher than last year’s event. Whether you’ve attended for the cars, accessories or the ladies, I’m sure the MIAS did not disappoint.

You know that MIAS is just around the corner when you hear blaring music announcing its presence. At the World Trade grounds, you are greeted by a queue of restored Mistubishi Lancers and Mini Coopers – a testament to the diversity of cars that are on display – the new and the old school. Entering the event proper, you see handsome jaw-dropping cars: the Lexus LF-A and a Ferrari (by the way, great car curation by the organizers). After crossing the big red barn doors… the beautiful chaos begins.

via automotivepartsuppliers.com

ow Engine Flushes can Prolong Engine Life | Roberts Automotive and Industrial Parts Manufacturing Corporation

To extend your car’s life is to be knowledgeable about the basic functions of your car. In this post, we’ll focus on the process of Oil Change. We are all aware that regular oil changes allow our car to perform significantly better, but what do we really know about the process itself?

Engine oils prevent car parts from rusting, but for them to remain effective, they have to be replaced every once in a while, depending on how often you use your car.

Heavily darkened oil is one common indication that you need to perform an oil change.  Take note that engine oil should not be refilled but flushed, which is a procedure that cleans the engine of dirt that has built up in various parts of the machinery over time. By performing an engine flush periodically, the internal components of the engine remain relatively clean and thus perform at optimum levels.  In detail, it prolongs the engine life due to the following reasons:

via roberts.com.ph

The Pros and Cons of Paintless Dent Removal Services | Automotive Parts Suppliers

With all the cars out there, from highways to parking lots, it can be quite difficult to protect a car from those dents and scratches, which are the common nuisances for drivers that continue to become more common as the days go by. No matter how careful one is, his or her car will eventually suffer that unlucky fate, either by his or her own action or by someone else’s.

To have such damages fixed is neither easy nor cheap, although one fair and effective way to resolve them is through availing paintless dent removal services.  IF you consider yourself to be a car enthusiast and a supporter of certain car manufacturing corporations, then maybe you can do perform the remedy on your own. Otherwise, leave the job to the experts.

via automotivepartsuppliers.com

How Soon Should You Replace your Car's Fuel Filter? | Roberts Automotive and Industrial Parts Manufacturing Corporation

Do you often hear a heavy snoring while you’re driving? Don’t look at your spouse; it’s probably the sound emitted by your clogged fuel filter. Such a phenomenon shouldn’t surprise you really, especially if Bush was still the President when you last replaced your fuel filter.

Located between the fuel tank and the fuel pump, your car’s fuel filter removes any impurities that could clog your fuel injectors, giving your car a consistently smooth ride.  Indeed, no vehicle can function normally without a fuel filter, and like all essential car parts, its effectiveness lessens as it ages. Dirt is the #1 enemy of fuel filters, and even a small portion of it can result in unstable performance, poor gas mileage, and in some cases, complete engine shutdown.

via roberts.com.ph

Damaging Cleaning Materials that You Shouldn't Use on Your Car | Automotive Parts Suppliers

Sometimes, people think that any random cleaning material can suffice for the overall hygienic requirements of their car. This is just plain wrong. Do you know that a number of cleaning products out there that can actually cause more harm than good to your beloved vehicle? A discomforting fact, but it is what it is. Hopefully, this post will give you peace in its goal to list down five cleaning materials that should never come into contact with your car. Let’s begin.

1) Detergent soaps

A lot of people wrongfully assume that detergent soaps are the same as standard car wash products, which is a gentler kind of soap precisely designed for car cleaning. Detergent soap actually removes the wax properties on the surface of the car’s protective exterior. Due to this, it is not advisable to use detergent soap unless one has plans to have his car waxed after.

2) Products that contain petrochemical and bleach

Petrochemicals and bleach in cleaning materials? Sounds good, right? I mean, these elements seem to promise a high level of cleanliness which we all desire for the cleanliness and maintenance of our car’s tires. However, although these cleaning materials can eliminate all the dirt that engulfs your tires, they can actually make the tires age prematurely as well.

via automotivepartsuppliers.com

Preparing your Car’s Radiator for a Cross Country Drive | Roberts Automotive and Industrial Parts Manufacturing Corporation

Every once in a while, we need to remove ourselves from our ever busy lives with some rest and relaxation. And a good cross country drive may be just the thing. But before that, you have to make sure that you won’t encounter any headaches during the entirety of your trip. Among the headaches that you might encounter is an overheated car. Wouldn’t it suck big time to encounter stress during an activity that intends to escape from it?

There are certain parts of your car that require constant inspection, like its brakes and tires. One particular part though that doesn’t receive as much attention as it deserves is the radiator. I’m sure there have been a few instances where you passed by overheated cars parked on the side of the freeway with their hoods popped open and heavy steam looming over it. If you are going cross-country, you might be thinking, why do I have to worry about my radiator overheating? Well, even by cross country standards, a radiator can definitely overheat.

Now, here are some helpful tips on how you can prepare your radiator for your cross-country drives. These are simple tips that will save you a lot of worry and, more importantly, repair bills.

via roberts.com.ph

Caring for your Auto Car Window | Automotive Parts Suppliers

Being a responsible driver means being knowledgeable about the vehicle you’re driving. Before driving off your garage, it is important to check your BLOW-BAG: Battery, Light, Oil, Water, Brakes, Air, Gas. These are all essential elements of an automobile, but what about other car parts that are just as important? What about our precious car windows?

If you are able to list down the number of times your car windows has protected you from pollution, sunshine, and rainfall, then’d you’d reward it with more credit that what most car owners usually give it. Listed below are 8 ways on how you can properly maintain your car windows.

via automotivepartsuppliers.com

Largest BMW Showroom in South East Asia to Open in Bonifacio Global City | Roberts Automotive and Industrial Parts Manufacturing Corporation

Cars are clearly the standardized mode of travel today. Things have been this way for quite some time now. Can your imagination really take you back to the time when bicycles were the leading trend in the world of transportation? Technology has indeed gone a long way, and our lifestyles and preferences follow whatever shape the universe adapts.

As you may have already heard, luxury brands are starting to fill the Philippine market, overwhelming car enthusiasts and owners alike to avail lavish upgrades and rejuvenating restorations.  Aside from the great news featured in this entry’s title, did you know that Rolls-Royce has also expressed interest in setting up a showroom here in the Philippines?

via roberts.com.ph

Rolls Royce to Open its Showroom in PH | Automotive Parts Suppliers

Phantom. Ghost. Wraith. These are names that are not fictitious characters from stories of the unknown, but are rather characters from the widely known brand, Rolls-Royce Motor Cars Ltd.  For many years, we have only seen a glimpse of their automobiles in movies, online stores, and second hand sellers.  Well, it is an honor for me to announce that such glimpses are finally over for that famous logo comprised of two R’s will soon be prominently visible in the Philippines.

According to a September 2012 BusinessWeek interview with Paul Harris, regional director of Rolls Royce for Asia Pacific, the automotive giant is looking into expanding to the Indo-China and Philippine areas.  This major business decision is primarily due to the fact that the company earned a good growth of sales in India this year, aside from its consistent market sales in Hong Kong.

via automotivepartsuppliers.com

How Car Tints Prevent the Sun's Heat | Roberts Automotive and Industrial Parts Manufacturing Corporation

Can you already feel the swelling heat of the scorching sun? Summer is just around the corner! Yes! We have once again arrived at that time of the year where people gather outside to have some fun! Swimming outings, family picnics, road trips, and other popular summer activities will surely be a hit again this season.

Except for people who are fond of having tanned skin, most people do what they can to avoid the sun’s rays. This can be seen through the endless list of inventions that has been designed to grant us shade and chill, like air conditioners, umbrellas, and, of course, car tints.

via roberts.com.ph

Do Gas Saver Fluids Really Work? | Automotive Parts Suppliers

In the continuing pursuit for ways to save money, many have confidently claimed to possess the best fuel-saving methods and products out there. A few of these trivial methods involve rolling down the windows, keeping the tailgate up or down, turning the air conditioner off, and so on. Several products have also been promoted that purportedly play an active role in saving fuel by manipulating the fuel itself. That’s something that gas saver fluids are marketed to do, and the very purpose of this post is to verify if these products actually work.

Gas saver fluids are additives that supposedly changes the fuel’s properties, making it more efficient in a number of ways. For one, petroleum-based fuels do not combust easily in their full liquid form, although they do if aerosolized. Also, higher octane fuels are more efficient in being converted to the energy that make your car run. The two factors mentioned can, in fact, result to a more efficient fuel. However, there are a few reasons as to why they wouldn’t really work.

via automotivepartsuppliers.com

DIY Leaf Spring Replacement | Roberts Automotive and Industrial Parts Manufacturing Corporation

Even with the advances in automotive technology, there are still automobiles out there that still use leaf springs as a suspension, which isn’t a bad thing in any way at all. They do their job rather well, even though some people may think that they’re rather primitive these days. There are a few advantages that leaf spring suspensions offer, one of which is its availability to be replaced by the driver himself. A great car owner is someone who has an extensive knowledge about all essential car parts, and this post should equip you with the right understanding when it comes to replacing your leaf spring on your own.

The very first step is to park your vehicle on a solid and level surface and pull the handbrake up. Picking the perfect spot to do the procedure is vital for your safety and the safety of others. Your garage should always be your first choice, but if circumstances force you to do it elsewhere, make sure that you perform the replacement in an area that’s not crowded with mobile cars. As soon as you’ve found your spot, raise and secure your vehicle with the floor jack just enough to have the axle assembly hang freely for the safe replacement of the leaf springs.

via roberts.com.ph

Things you Can Do to Make your Car More Comfortable | Roberts Automotive and Industrial Parts Manufacturing Corporation

Most people say that comfort can be spelled as H-O-M-E. True enough, most of us see our home as our beloved comfort zone where we can just be ourselves as we dress without worrying what people might think of us, as we eat with our feet rested on the table, as we lie down while doing our work. Acknowledging this blissful truth about our home, it’s kind of sad to realize that we don’t get to spend as much time in it as we want. We have to go to work, run errands, pay bills, shop, explore, everything. But does this mean that we can’t enjoy a comfort zone outside our home? Of course not! We can extend that soothing experience as we drive our car. Here are five things you can do to make your car more comfortable.

1) Your car seat is one essential factor when it comes to achieving great comfort while driving, whether you’re going for a road trip or just heading to the nearest supermarket. Placing an ergonomic seat cushion won’t just bring comfort; it also supports your upper and lower back. Adding a neck pillow will reduce neck and shoulder stress whilst driving, which is definitely a good catch especially when your headrest doesn’t fit your preference.

via roberts.com.ph

Are New Gasoline Stations Worth Trying? | Automotive Parts Suppliers

Most gasoline stations are filled with fossil fuels which are said to be antiquated and polluting. Some would even say that they should be obsolete as there are alternatives that can be used to power automobiles and other engines. Most of the new environmental-friendly cars are either hybrids or special models that have been configured to receive biofuels. New gasoline stations now carry these alternative fuels, but their value must first undergo some necessary reviewing.

The most common form of automobile these days that make use of alternative fuel are those with hybrid engines, which are basically one part conventional engine and one part electric engine that’s powered by batteries. Charging these batteries takes a considerable amount of time while conventional fuels only require a short moment to refill a gas tank. Of course, this hasn’t stop certain establishments, like gasoline stations and even universities, to set up charging stations for these battery-powered cars.

via automotivepartsuppliers.com

Racing Mode: Stiff or Soft Suspension | Roberts Automotive and Industrial Parts Manufacturing Corporation

In racing, suspensions play a major part in ensuring that both car and driver makes it to the finish line safe and sound.  In order to keep up with the competition, a lot of racers avail of all the latest upgrades, which is essential in itself, but the ultimate secret in winning the race is having a well-balanced set up. It is advisable to seek the help of a professional in upgrading a suspension because the necessary parts are almost always customized for a particular brand.

Studies show that soft suspension is recommended in racing because this makes the weight transfer more gradual. Also, it’s been said that it increases body roll and lessens abrupt loading, which helps the car run more smoothly and easily when driving through a curve or when drifting.

via roberts.com.ph

How does Volvo Intend to Build a Crash Proof Car? | Automotive Parts Suppliers

The archives of YouTube have so many car crash compilations that it seems that no driver can be entirely safe on the road, no matter how cautious he may be. To say that car accidents are a bummer is a cruel understatement, and in the world of safe driving, Volvo is taking the lead. The 85-year-old company currently has around 50 engineers working with automotive partners, such as Ricardo UK, on the new crash proof car technology.  Volvo hopes to launch the first accident-free vehicles by 2014. These cars can only run up to 31mph, but faster versions will be available by 2020.

How does it work?

Volvo is coming up with a computerized, self-driving vehicle, which will be installed with high-tech sensors that will take over the car’s steering at times of imminent accidents. It also has the capability of “communicating” with other cars over the airwaves about accidents or congestions ahead, automatically taking avoidance actions along the way. Along with its collision-avoidance features, Volvo’s crash-proof car will also come with a pedestrian and animal detection, which causes the car to involuntarily slow down whenever something is blocking its way.

Here are other significant qualities of Volvo’s very own crash proof car:

• 

via automotivepartsuppliers.com

How to Protect your Car from the Summer Heat | Roberts Automotive and Industrial Parts Manufacturing Corporation

The immense heat that has constantly scorched the streets of the Philippines can take a serious toll on our beloved vehicles. It is during these searing times when our cars are pushed to their very limit. ‘Tis the season where road trips to windy, soothing beaches are common, and the last thing we need is an engine that will stall due to overheating. Here are some preventive measures that you can practice to help your vehicle keep running smoothly despite the severe summer heat.

Heat can negatively impact your car’s battery. 

Heat and vibration are the factors that lead to a battery’s internal breakdown and failure.  Faster evaporation of the battery fluid leads to corrosion on terminals and connections.  What you can do is to properly clean any corrosive build up from the battery terminals and cables clamps; ensure that the clamps have been appropriately tightened when cleaning.  To minimize vibration, drivers should also make sure that their battery is securely mounted in place. If your battery is more than three years old, it’s advisable to have it checked by a trained technician.

via roberts.com.ph

5 Signs your Car Insurance is a Scam | Automotive Parts Suppliers

Occasionally, insurance companies offer great discounts and low protection premiums on their products and services. With a wide variety of companies to choose from, how can one determine which agencies are legit and which ones are a scam? Below, you will find five concrete signs that indicate a high possibility that you are being swindled to a car insurance rip-off.

1) Über low insurance fees

We hate astronomical prices, but the exact opposite is just as scary. When you find yourself asking the question “Why is it priced so low?” conduct a background check on the company offering the low premium. Do your research. Are they still doing well? Do they do this often? Is this a new company trying to attract clients? Base your decisions from the answers you acquire.

via automotivepartsuppliers.com

Pros and Cons of Converting to LPG Fuel | Roberts Automotive and Industrial Parts Manufacturing Corporation

The number of cars converting to liquefied petroleum gas for fuel is increasing. If you’re not aware yet, LPG can be used as an alternative to the usual petroleum for your vehicle. And yes, this is the same energy source that you use in your kitchen to cook and heat food.

In this article, we will help you crunch the pros and cons of this conversion before you decide whether or not to join the 11 million vehicle owners worldwide who have gone through with the conversion process.

via roberts.com.ph

When is DIESEL better than GASOLINE? | Roberts Automotive and Industrial Parts Manufacturing Corporation

Diesel has gained a reputation for being dirty, and apart from the fact that diesel engines are also noisy, it has already been pointed out to be responsible for smelly exhaust emissions. Also, diesel engines are also regarded as ineffective during cold seasons. Because they don’t have a spark plug, fuel is directly injected to the cylinder that is already under pressure, which ignites it spontaneously.

Other than the aforementioned points, there are many more reasons why people hold on to the conviction that gasoline is better than diesel. And although no one is questioning the supremacy of gas over diesel, there are still some circumstances when the latter has the advantage over the former. They are the following.

via roberts.com.ph

Benefits of Tire Siping | Automotive Parts Suppliers

Tire siping, which is the process of cutting the tread of the car with slits and minute edges, is most favorable if you are fond of traveling to wet and icy roads. In this article, we will discuss five benefits of car siping that every car enthusiast should know about.

1) Improved Traction

People used to get studs for their tires to prevent dirt and tiny rocks from damaging them. But studs can’t be installed on used tires, which is one of several reasons why you shouldn’t buy used tires in the first place. To avoid any of these hassles and dilemmas, have your tires siped at a trusted automotive shop. Siped tires will result in a 200% improvement in traction, protecting the tires against materials that can lead to flat tires.

via automotivepartsuppliers.com

Metal Stamping: A Simple Explanation | Roberts Automotive and Industrial Parts Manufacturing Corporation

Metal stamping is the manufacturing of metallic components by applying an extreme amount of pressure to blank pieces or sheets of metal. The purpose of this metal stamping process is to be able to produce formations of any shape and size desired out of the metal sheet. The ability of shaping metal into different shapes has immense importance in any manufacturing industry that you can think of.

Take the automotive industry as an example. Cars need to have strong, tough and durable materials to be safe and effective mediums of transportation, which only metal can provide. The components of an internal combustion engine cannot be plastic, as it will melt away in a matter of minutes. Neither can the chassis of the car be made of plastic for you will find yourself tumbling in the middle of the highway the minute you breach the withstanding threshold of the plastic material.

via roberts.com.ph

Limitations of Electric Vehicles | Automotive Parts Suppliers

The past decade marked the age where electricity can be the foremost source of power of cars. The likes of the Chevrolet Volt and the Nissan Leaf sparked the popularity of electric vehicles. This breed of cars have a set of considerable benefits such as reduced gas consumption, zero carbon emissions, less noise and less sophistication on the construction compared to regular car engines. However, there are also limitations to an electric vehicle. Here are some of them.

1) Reduced Range

If you only need a car for daily trips to nearby shops and the office, then using an electric car will be perfectly okay. However, if you’re someone who’s fond of long-distance travels and frequent road trips, you may encounter a few problems. As you know, electric cars are powered by batteries, which are not really built for long mileages. This fact may cause anxiousness in this present time, but all should be fine once gas stations become equipped with areas exclusive for charging.

via automotivepartsuppliers.com

How to Properly File an Accident Report | Roberts Automotive and Industrial Parts Manufacturing Corporation

As much as we would want to deny it, motor vehicle accidents (MVAs) do happen, and they do so on a daily basis. The incident of having two or more hunks of metal smashing against each other at high speed is always a tragedy, and manufacturing companies continue to look for ways on how to minimize damages and prevent human losses. Whether you have been involved in an accident before or not, you should know how to properly make an accident report. But just in case that you are still unfamiliar with the process, here is a guide that should help you attain a better understanding of it.

Write a Proper Report

Give as much details about the crash as you can. The date, time, and location of the accident are crucial information that you must put down; other details like weather condition, lighting, visibility, and so on are also helpful. As for the location, try to be as specific as possible by indicating the name of the street where the incident occurred. Don’t forget to mention the details of the vehicles involved, including the manufacturer, model, make, plate number, and so on.

via roberts.com.ph

How Bigger Rims Affect Fuel Consumption | Roberts Automotive and Industrial Parts Manufacturing Corporation

As one of those indispensable car parts that are designed to hold the tires, rims make up the outer edge of wheels. They are measured in diameter (distance between the bead seats or the length of its plane through the axis of the hub) and width (distance between opposed rim flanges) by which the maximum rim width should be equal to the tire thread’s width. Any driver who wishes to be fully familiarized with their ride should know that there are various rim profiles as well as a number of rim components.

Because it is the rim that supports the shape of the tire, the dimensions of the rims are an essential factor in the characteristics of all automobiles. For example, overly wide rims, in relation to the tire width of a particular car, may result to bumpy, uncomfortable rides because the sidewalls of the tire have insufficient curvature to flex properly over rough driving surfaces.  Oversized rims will cause tires to rub when turning while overly narrow rims may cause poor handling as the tire may distort sideways under fast cornering.  Also, damages to the rim can cause a shaky trip, lowering the tire’s capacity to withstand pressure which, in turn, could lead to a flat tire.

via roberts.com.ph

How Gasoline Prices are Affected by Stronger Philippine Peso | Automotive Parts Suppliers

For so many years, the Philippine Peso was down in the dumps against other first world currencies, but recent improvements in the economy have caused a sudden and subtle recovery. Slowly but surely, the peso is climbing its way back to a healthy position similar to where it was 10-15 years ago. This is very good news. The prices of basic commodities, like imported oil, will adjust for the benefit of our country.

The constant rise and fall of oil prices in the world market results in an unstable flow of government and private transactions, leading to higher costs. This conflict, in turn, would cause hardship amongst average Filipino folks, especially to those who belong to the lowest strata of society.

via automotivepartsuppliers.com

Pros and Cons of Car Lowering | Automotive Parts Suppliers

Motorists who can afford modifications for their cars tend to get them with the goal of increasing their performance beyond the stock. This includes making the car lighter, adding turbochargers under the hood, firming up the suspension, making the body more aerodynamic, and so on. One trick the some car lovers love to do for better performance is car lowering. Like most modifications, this has a set of advantages and disadvantages. Let’s take a look at them.

PROS

The thing about car lowering is that as long as you have access to the services of a body shop that you can trust with mechanics that are more than proficient at their craft, then all you have to do is to shelf out a few hundred bucks and get a better running car as a result. However, there are a few things to consider before you partake in such a procedure for your car.

via automotivepartsuppliers.com

How to Report a Corrupt Police Officer | Roberts Automotive and Industrial Parts Manufacturing Corporation

As good as the world is with its natural beauty and glory, it’s the countless institutions within our society that may drive us crazy. Corruption is rampant even in developed nations, and the police force is contaminated with people who practice such disgrace. That ordinary citizens are exploited by corrupt police officers every day saddens the community. Didn’t they swear to protect and serve the people, and not make them subject to extortion? It is the duty of citizens to step forward and report the bad apples so that other drivers don’t have to experience the same thing.

Reporting a corrupt police officer can be kind of tricky, especially with how they are not afraid to abuse the power that is given to them. Therefore, the first thing that you must do when you encounter a corrupt police officer is to not give him any hints that you’re about to report him; any suspicion from him could compel him to resort to drastic measures in an attempt to save his own skin. If he is able to obtain the identity of the person who reported him, stay as far away from him as possible. If push does come to shove, then a restraining order is perhaps your last resort.

via roberts.com.ph

How Does your Car's Gasoline Octane Level Affect your Car? | Automotive Parts Suppliers

All cars are composed of four-stroke gasoline engines. Of these four, the compression stroke is the one that condenses air and gas into a smaller volume in a cylinder before it is ignited by the spark plug. The amount compressed would then be called compression ratio. The gasoline octane level of a vehicle will tell how much compression the fuel needs before it can ignite. Usually the compression ratio is 8:1. Thru this ratio, one can accurately determine the octane rating of the gas that one must use in his or her car.

For a car engine to assume a high-performance level, it must have a high compression ratio and a high octane fuel. A high compression ratio involves a higher horsepower though the gasoline for the engine may cost higher as well. Making use of high octane gasoline prevents engine knocking as it tends to burn slower than low octane gasoline. Although it is important to note that this is not a fixed principle as certain cars can react differently to various types of gasoline. If your car is running on low octane gasoline running and has not experience engine knocking, then switching to high octane will not result to any significant advantages. It all really depends upon the build of the vehicle’s engine.

via automotivepartsuppliers.com

Casa Services vs. Aftermarket Service Centers | Roberts Automotive and Industrial Parts Manufacturing Corporation

When our car is in need of a repair, we always choose between the services of a car dealership (aftermarket centers) and the availability of OEM car parts (casa). Those who want genuine car parts usually seek out the products of Original Equipment Manufacturers while others who are looking for cheaper options tend to turn to aftermarket services. But which one of these services should you choose? Does the price really reflect the quality of the parts? When are OEM parts necessary to avail? Let’s take a look at the differences between casa and aftermarket services.

Aftermarket Services

The services of car dealerships are usually less expensive than those of casa, both in parts and service charges. As they repair or replace damaged parts, they also point out other parts may be in need of a check-up. Aside from that, aftermarket shops also manage to get the job done faster than casa, causing less hassle to the owner of the vehicle. Another advantage worth mentioning is the fact that there are more aftermarket shops out there to choose from, and the parts that they offer are more readily available.

via roberts.com.ph

Are Christmas Lanes are Effective? | Automotive Parts Suppliers

Another Christmas Season is finally here! And along the joy and love that comes with this merry occasion is the nerve-wracking buzz of finding the right gift for the ones we love.  However, getting though this ordeal is daunting for some since it is certainly not a joke to find one’s self caught in the middle of a sea of cars during the rush hour’s peak. The addition of Christmas Lanes has given us drivers some breathing room in the way they provide a leeway from the constricted roads that the yuletide season brings.

Before we go on further, it is important to note that these Christmas Lanes will cause little to no inconvenience for the major motorway’s of the country. Though it would be great to have additional lanes open all year long, this is just a temporary solution in decreasing traffic problems and accidents caused by the crowded highways. But nonetheless, these lanes create relief and spell safety for all the drivers who are trying to visit as much friends and family as they can during the Holidays.

via automotivepartsuppliers.com

Is the 24-Hour Truck Ban on Edsa Effective? | Roberts Automotive and Industrial Parts Manufacturing Corporation

As the crossroad of the major cities in the country, EDSA is surely one of the busiest motorways out there.  The traffic there is always heavy, leaving both commuters and vehicle owners twiddling their thumbs in exasperation.  Moreover, when there are accidents, the delays are more devastating, and one can spend their entire day stuck in a vast, endless vacuum of immobile automobiles.  Not a pleasant ride at all, if you can actually consider it a “ride”. Such aching traffic is a real pain in the neck, and we all know that those darn, fat, road-hogging trucks deserve a lot of the blame. Although trucks have their allocated lanes, a few douche drivers will still make use the lanes that are dearly reserved for you and I.

Especially throughout these busy times, Truck Bans must be implemented to lighten the load of vehicles in this hectic avenue.  During Christmas Season, more and more accidents occur between all kinds of vehicles, which do nothing but worsen the already dreadful traffic.  To ease this time-consuming burden, certain protocols should be given to trucks.  They can be given a specific detour which can be of convenience for them and their goods.  Think about it. This would be a win-win both for the trucks and the average vehicles.  But even though this sounds really beneficial for everyone, there will be difficulty in convincing truck operators and drivers to adapt to this regulation.

via roberts.com.ph

The Top 5 SUVs of 2012 | Automotive Parts Suppliers

The comfort and security that one feels when they ride an SUV is something that is hard to top, a lot of people would still want a good sizeable SUV even though there are countless of smaller cars out there that keep getting better and better. With that in mind, here are five of the best SUVs in the market for the year 2012.

2013 Ford Escape

One of the more affordable compact SUVs in the market today, the new 2013 Ford Escape was redesigned for much convenience and comfort. This SUV rates high in safety and performance, with various features like the Ford Sync and MyFord Touch that helps you link the car with certain devices that assist in rear parking and blind spot monitoring. This particular model one does take the cake in the compact SUV department. However, make sure to skip the base engine and go straight to Ecoboost for superior fuel economy.

via automotivepartsuppliers.com